A Complete Guide to Assessment Validation and Validating Assessments
A Complete Guide to Assessment Validation and Validating Assessments
Blog Article
RTOs face many tasks after registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation is typically the most daunting.
Though we've written extensively on validation, let's clarify it again. ASQA describes it as a quality assessment review.
Put simply, validation checks which parts of an RTO's assessment process are accurate and spots areas for enhancement. A proper understanding of its main elements can make validation less daunting.
According to SRTOs 2015 Clause 1.8, RTOs must ensure that their assessment systems, including RPL, comply with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.
The standards mandate two types of validation.
The initial type of assessment validation ensures compliance with the training package assessment requirements within your RTO's scope.
The second kind of validation ensures assessments are carried out in accordance with the principles of assessment and rules of evidence.
It indicates that validation occurs both before and after the assessment. The focus here is on the first type: assessment tool validation.
An Overview of the Two Types of Assessment Validation
Breaking Down Assessment Validation
As mentioned earlier and in our earlier blog entries, validation is divided into two parts: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, also known as pre-assessment validation or verification, pertains to the first part of the clause, focusing on ensuring all unit requirements are met and that all workbooks are fully compliant.
In post-assessment validation, the emphasis is on implementation, ensuring that Registered Training Organisations conduct assessments as per the Principles of Assessment and Rules of Evidence.
This discussion will center around assessment tool validation.
How to Conduct Assessment Tool Validation
With a grasp of the two validation types, let’s focus on assessment tool validation.
When Should You Conduct Assessment Tool Validation?
Assessment tool validation seeks to ensure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
Thus, whenever new learning resources are purchased, you must conduct assessment tool validation before allowing student use.
There's no need to wait for your next 5-year cycle validation schedule. Validate new resources immediately to ensure they are suitable for student use.
Yet, this is not the only occasion to conduct this type of validation. Perform assessment tool validation when you:
- when resources are updated
- you add new training products on scope
- when course is reviewed against training product updates
- identify your learning resources as a risk during your risk assessment
The Australian Skills Quality Authority's risk-based regulatory approach means RTOs should conduct regular risk assessments. Complaints from students about learning resources are a prime opportunity for assessment tool validation.
What Training Products Need Validation?
Bear in mind, this validation is meant to ensure all learning resources are compliant before use. All RTOs are required to validate all unit resources.
Resources Required for Assessment Tool Validation
Course Materials
As you validate your assessment tools, you will need the complete set of your learning resources:
Mapping tool – the first document to check. It indicates which assessment items align with unit requirements, making validation faster.
Learner/student workbook – assess its appropriateness for use as an assessment tool. Verify clear instructions and adequate answer fields. This is often a gap.
Assessor guide/marking guide – also verify if instructions for assessors are sufficient and if clear benchmarks for each assessment item are provided. Clear benchmarks are crucial for reliable assessment outcomes.
Other related resources – might include checklists, registers, and templates developed independently from the workbook and marking guide. Validate them to confirm they fit the assessment task and address unit requirements.
Validation Group
Clause 1.11 sets out the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs generally require all trainers and assessors to be involved, sometimes including industry experts.
In total, your validation panel must have:
Relevant vocational competencies and industry skills for the unit being validated
Up-to-date expertise and skills in vocational teaching and learning
Any one of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or the successor version
Validation form/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool supports the validation process and documentation. It simplifies understanding how each assessment item maps to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can act as evidence that you have validated your resources before they are used by students.
ASQA does not provide a specific template for assessment tool validation, but numerous templates can be found online. These tools often have validators look at the tools as a whole to verify if they meet the principles of assessment.
Principles of Assessment Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Although these templates ease the validation process, they can cause errors in judgment as there is minimal space for commenting on each assessment item.
It is advisable to use a more detailed template to inspect each unit requirement and its corresponding assessment items. Below is an example:
Element Performance Criteria Assessment Guidelines Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Look For?
As highlighted in our blog post Common Problems In Assessment Tools, it is essential that your assessment tools enable trainers to adhere to assessment principles and evidence rules.
Assessment Core Principles
Fairness – Is the assessment process equitable and accessible to everyone?
Flexibility – Does the assessment offer various options to demonstrate competence based on different needs and preferences?
Validity – Is the assessment measuring what it is supposed to measure? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment yield the same results each time, no matter who conducts the training? Will different assessors make consistent decisions on skill competence?
Evidence Core Rules
Validity – Is the evidence verifying that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there sufficient evidence to confirm the learner has the required skills and knowledge?
Authenticity – Does the assessment tool ensure that the work belongs to the candidate?
Currency – Are the assessment tools aligned with current units of competency and contemporary industry practices?
Despite being frequently covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.
To avoid employing learning resources that leave unit requirements unmet, be sure to adhere to these guidelines:
Show What You Mean
Observe the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance more info evidence requirement requires students to:
Perform each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:
changing diapers
bottle preparation, feeding infants from bottles, and cleaning equipment
prepare solid food and feed babies
respond to baby signs and cues suitably
settle infants for sleep and prepare them
monitor and support physical exploration and gross motor skills appropriate for the age
Having students explain changing nappies for babies under 12 months old doesn’t directly address the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be carrying out the tasks.
Be Cautious with Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t sufficient.
All or Not Competent
Mind the lists. In the previous example, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Clarify Further
Each assessment item must include clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Hence, ensure your instructions are clear and not confusing for students or assessors. For instance:
What kind of information can be included in a work package?
What kind of information can be included in a work package?
The answer might include:
Necessary materials
Corresponding costs
Time allocated for activities
Assigned duties and responsibilities
When an assessment item calls for several answers, indicate the number of answers required from a student. This way, your assessment remains reliable, and the evidence collected is valid.
This is also true for assessment items with double-barrelled questions or those that require multiple answers at once. These can confuse students and assessors, as demonstrated in the sample question below:
Identify a hazard and/or environmental issue in the work area and select the most effective hazard control hierarchy.
Possible answers can include, but are not limited to:
Weather conditions – isolation of work area, engineering, PPE
Work area and ground conditions – eliminating hazards, isolating, engineering controls
People – isolating, use of engineering controls, administration
Structural hazards – substitution, isolating, engineering controls
Chemical hazards – isolating, use of engineering controls, administration
Equipment or machinery – isolating, use of engineering controls, administration
Steering clear of double-barrelled questions makes it easier for students to answer and for assessors to accurately judge student competence.
Seeing these requirements, you might wonder, “Don’t learning resource developers provide audit guarantees?” However, these guarantees mean you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s wiser to take a safe and compliant approach.